CHOOSE LANGUAGE
Latest News
Timars delivers new drawbar trailers for ARLA FOODS
2011-12-07
Timars won the tender for 10pcs drawbar trailers for milk transportation for ARLA FOODS in Sweden. 
The 4-axle trailer from MAGYAR has volume of 26.000 liters in 1 compartment. Other equipment such as P-Light, overfilling system, Super Single axle and internal C.I.P line is mounted. The trailers were all delivered during first half of this year.
Timars deliveres a new generation tank setup for Carlsberg
2011-12-07
Timars has together with MAGYAR designed and delivered to CARLSBERG a new generation of multimodal tank setup. The
delivery consists of 6pcs tank swap container of 11.000 liter in 3 compartments and is certified and approved to go on road and rail to form a new logistic concept to a more flexible and higher efficiency. The unit is self supported with a power unit, compressed air, CO2 bottle and regulator system, Webasto heating system, fuel, pumping unit and 70m hose reels and therefore needs no control during transport and can distribute beer without external needs. The swap container is equipped with corner castings, fork lift pockets, grappler arms and foldable retractable and adjustable unique legs. The tank has the highest insulation factor on the 
market today in order to preserve the good quality of the beer and all information regarding the tour, clients and beer types and each action is stored in to a ARS computer for easy transfer between the unit and accounts department for invoicing or simply a ticket printed at each delivery. Timars has also equipped and tested the four rigid chassis that carries the swap tanks.
Timars expands: New workshop facilities
2011-11-14
Timars has expanded the workshop facilities with 1250 square meters. The new factory was built during summer and in
September production started. It is located just next to Timars current facilities and will be mostly dedicated to assembling of Timars products such as port equipment. This will be a clean production line and the building is also raised in the same environmental thoughts that are significative for Timars. Warmed by earth heat pump and the lights are the latest LED technique to keep the energy consumption to a minimum. Timars also have plans for raising windpower stations on the site and since before the water is heated by solar panels.
The new facilities are important step in Timars development and the expansion is a need to meet the customers increased interest in Timars products.
Timars at Vaxjo Krandagar 2011
2011-10-19
Timars will have a stand at Vaxjo Krandagar at Vaxjo Koncerthall on 9-10th of november. Vaxjo Krandagar is arranged by Inspecta in cooperation with Swedish Ports association. For more information se www.inspecta.se
New fishprocess equipment to Finland and Estonia
2011-09-08
Timars gained two large orders on fish-process equipment this summer with a reception station with grading machine to Käldinge fishport in Finland and a grading machine to Haapsalu in Estonia.
The machines to Finland include fishpump, de-watersystem, isolated hopper with elevator and a Timars Grading master type - L (Vibration grader). The capacity of the system is app. 15000 kg/hour (herring and sprat). There will be five grading underneath and one receiver at the end of the machine.
The machines will be installed in Käldinge in week 37.
The order to Haapsalu in Estonia is for grading Baltic herring and sprat. Timars will deliver a hopper (2500 litre) with elevator, a Timars Grading Master type - LR (Rollergrader) with 17 rollers and a capacity up to 12 tons per hour. The total length of this system is less then 9m due to lack of space.
Timars at Danfish in October
2011-08-08
Timars will have a stand at Danfish in Aalborg, Denmark. Timars will share a stand with our partner LSM pumper and you will be 
able to meet us and discuss our famous solutions for fish processing. The exhibition is between the 12th of october until the 14th of october.
Timars develops a new vehicle for work by the road
2011-05-10
Timars is currently in a project where a new type of vehicle for work by the roads and motorways are being developed. The proje
ct was originally started by the Swedish Transport Administration and the purpose is to move work from the roads and motorways to outside the road. This would make a safer work environment for people working with maintaining the ditches, exchanging road poles and sign and similar work. It would also decrease the cost of using TMA-vehicles (for redirecting the traffic and protecting people).
Roland Andersson, professor in Innovation, has made an analysis for basic data for the project. And he has affirmed that the vehicle (with the working name TamCraft) will decrease the work related accidents by up to 20% and save app. 42,5 million SEK a year for the Swedish roads maintenance.
The six wheeled vehicle will be able to lift the wheels separately for driving over up to 70cm high crash barriers and it will also be able to drive on sloped ground with the cabin horizontally. It will be equipped with different tools for example grass-cutter.
The project is partly financed by Vinnova.
A prototype will be ready in the end of 2011.
Latest orders for Timars portequipment
2011-05-06
Timars have experienced a very good order stock this far in 2011 and has gained many orders from both new and former customers. The sale for the first six months in 2011 has already passed the sale for the whole year of 2010 (port equipment) and there are no tendencies of slowing down. Some orders to be mentioned:
Four unit of Timars Gravity Centrelizers to Abu Adel in Doha Qatar.
Timars C-lift spreader equipped with Timars Gravity Centrelizer to Russia. This spreader equipped with the Gravity Centrelizer continues to be a great success in Russia and are highly appreciated.
Six units of Timars HCL spreader will be delivered to Sherritt oil and two of theirs facilities on Cuba. These spreaders have been fully hot dip galvanized for even longer lifetime.
Four C-lift spreaders to Sirlab in Wenniba, Ghana. Sold through our partner Kalmar West Africa.
We have also repeated orders on Timars OHA - fully automatic overheight frames to Noumea in New Caledonia and to St. Petersburg in Russia. The latest version of this overheight frame has been a great success and is now gaining more and more market shares.
New deliveries to windpowerfoundations
2011-04-07
Timars has a wide competence and delivers smart solutions within many different areas. Recently Timars have developed a new bolt solution with Mobjers Entreprenad to foundations to windpowerstations. And the result has been a great success with many new project coming during 2011.
Swedish defence place new orders to Timars
2011-04-07
FMV, The Swedish Defence Material Administration, has once again put their faith in Timars and placed two large orders. 
Timars delivered three sets of mobile fuelsystems back in 2007 and now FMV has ordered two more sets. Every set consists of one pump container and six units 20 cubic meter storagecontainers. The equipment is supposed to be used internationally in NBG11 troop.
Timars recently also won another tender to FMV on a delivery of 106 special trailers. The trailers are aimed for transportation of different kinds and will be mainly used with tracked vehicles. They will be used on roads, in forests, on snow and in water. They will also be used
internationally.
